Pelco SD436-PRE0 Pressurized Spectra IV SE Dome Camera System (Light Gray, NTSC)

The light gray SD436-PRE0 Pressurized Spectra IV SE Dome Camera System from Pelco provides protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. This system includes DD436 Dome Drive with integrated 36x Day/Night camera, BB4-PR-E Pressurized Environmental Pendant Back Box, and LD53PR-0 Lower Dome with Smoked Bubble designed for optimum optical clarity.

A stainless steel construction provides added protection in harsh environments. The dome system is easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system. Sensors strategically placed in the dome system send an alert message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits. The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point.

The included BB4-PR-E Pressurized Environmental Pendant Back Box features a sun shroud, heater, and fan to maintain a consistent operating environment. The back box also features built-in back box memory, an integrated passive UTP circuit, 2 auxiliary outputs, and 7 alarm inputs. The included LD53PR-0 Lower Dome with Smoked Bubble features an O-ring seal and a stainless steel V-band to create a reliable pressure seal. The V-band has a unique latching system with 1 captivated fastener making lower dome installation easy. Accessible on the lower dome trim ring are a Schrader valve for system purging and a pressure relief valve. The system is supplied with a pre-wired cable with mating connector. The cable includes all wires for system’s functionality, including power, alarms, auxiliaries, coaxial video, UTP video, and serial control.

The included Spectra IV SE DD436 Dome Drive features an integrated 36x Day/Night Camera allowing the system to produce high-quality videos in difficult environments. The camera features LowLight technology, which allows the cameras to compensate for scenes where minimal light is present. Moreover, it also features built-in motion detection and 128x WDR that enables the system to compensate for scenes where dramatic contrasts in lighting are present. This day/night camera features EIS (Electronic Image Stabilization) that digitally reduces blurring of the image due to vibration caused by external sources, such as wind and traffic. The Auto Sharpness feature enhances the picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.

The Spectra IV SE dome drive features many software enhancements that increase the performance and makes configuration and operation easy. An internal scheduling clock allows for the scheduling of presets and patterns. Window blanking enables a user to configure up to eight, 4-sided, user-defined privacy areas. Password protection prevents unauthorized users from changing the system settings. Configurable on-screen compass and tilt display provides positioning information when needed.

Intuitive multilingual on-screen menus can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech. The dome drive’s variable speed capabilities range from a smooth, fast pan motion of 400°/sec to a smooth creep speed of 0.1°/sec. The system is capable of continuous 360° rotation and has an auto flip feature that allows the dome to rotate 180° and reposition itself for uninterrupted viewing of any subject that passes directly beneath the dome.

With the Pelco TXB-N module (sold separately), you can add IP network capability at any time to this dome system without losing analog viewing and control. By snapping the TXB-N module into the back box, you can stream network video to a web browser, Endura, Digital Sentry, or third-party software recording solution allowing integration into virtually any IP-based system.

Dome Drive
256 presets, ±0.1° preset accuracy
Electronic image stabilization and image enhancement
Multilingual Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)
RJ-45 data port for software update and setup
On-screen compass, tilt, and zoom display
400°/sec pan preset speed and 200°/sec tilt preset speed
Rotating discreet liner with sealed fixed bubble
Window Blanking: Up to 8, four-sided, user-defined shapes
8 zones, configurable in size, can be labeled with up to 20 characters each or set to output blank video
7 alarm inputs
1 Auxiliary (form C) relay output and 1 open collector auxiliary output (can be alternately configured to operate upon alarm)
Configurable locations of labels and on-screen displays
Action on Alarm: Alarms can be individually configured for 3 priority levels, to initiate a stored pattern, or to go to an associated preset when received
Resume After Alarm: Allows the dome to return to a previously configured state after alarm acknowledgement or to its previous position before alarm
Multiple park and power-up action
Up to 8, on-screen, user-defined configurable patterns including pan, tilt, zoom, and preset functions
Proportional Pan / Tilt: Continually decreases pan/tilt speeds in proportion to depth of zoom
Variable Scan Speed: Scan speed can be configurable between 1 to 40°/sec
Pan motion allows 0.1 to 150°/sec pan speed
Configurable limit stops for auto / random / frame scan modes
Autosensing Protocol: Coaxitron, RS-422 Pelco P and Pelco D, Sensormatic, Vicon
Digital position and zoom control and feedback Through Pelco D protocol
Built-in menu system for setup of configurable functions
Auto Flip rotates dome 180° at bottom of tilt travel
Configurable zoom speeds
Low lux noise reduction reduces noise in low light
Note:
The system accepts other control protocols with a translator card (sold separately)
Back Box and Lower Dome
Pressurized to 8 psig (55 kPa)
Solid-state sensors for internal temperature, pressure, and dew point
On-demand environmental status display for internal temperature, pressure, and dew point
On-screen alert modes and programmable menus for pan/tilt, camera, and sensor alert settings
Built-in back box memory
Integrated passive UTP circuit
2 auxiliary outputs and 7 alarm inputs
Environmental pendant style back box
Stainless steel construction
Meets NEMA Type 6P and IP67 standards
Built-in power line surge and limited lightning protection
UL/cUL listed

In the Box
Pelco SD436-PRE0 Pressurized Spectra IV SE Dome Camera System (Light Gray, NTSC)
Pelco DD436 Spectra IV SE Dome Drive (NTSC)
Pelco BB4-PR-E Spectra IV Pressurized Environmental Pendant Back Box (Gray)
Pelco Pressurized Spectra Lower Dome
3-Year Warranty