Vaddio RoboSHOT 20 UHD OneLINK Bridge System (Silver/Black)

The RoboSHOT 20 UHD OneLINK Bridge System from Vaddio combines a silver and black RoboSHOT 20 UHD PTZ camera and OneLINK Bridge interface. It is suitable for use in distance learning and corporate environments. The system captures 3840 x 2160 video at 30p from a single 1/2.3″-type Exmor sensor and transmits it up to 328′ over CAT5e/6 cable. The combination enables powering the camera, sending control signals, and transmitting video over a single Ethernet cable.

The PTZ camera features a 20x total zoom range with 74° angle of view at wide, with a 4.8° angle of view at maximum zoom in. The OneLINK features HDMI, USB 3.0, and HD-SDI video outputs, audio inputs and outputs, and accepts HDBaseT input as well as RS-232 and Ethernet.

Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (Silver/Black)
This silver and black RoboSHOT 20 UHD Ultra High Definition PTZ Camera from Vaddio is suitable for use in distance learning, corporate and house of worship. It captures UHD 4K (3840 x 2160) at 30p from a single 1/2.3″-type Exmor R sensor. Featuring a 12x optical zoom, with a 1.67x digital zoom for a 20x total zoom range, the camera has a 74° angle of view at wide, with a 4.8° angle of view when zoomed in all the way.

The camera simultaneously outputs HDMI, HDBaseT, 3G-SDI, and IP streaming, so there is no concern about selecting an output port. You can control the camera from a networked computer via the Ethernet port, and an included IR remote provides local control. You can tell at a glance the status of the unit thanks to a built-in LED that changes color to indicate the state of the camera.

The camera’s outputs are active at all times, so there is no need to select one output over another. This also allows you to output to more than one display device or recorder at the same time. The built-in IP streaming simplifies streaming your video over a network.
HDBaseT provides power over an Ethernet cable, so you are not limited where you can mount the camera by needing an AC outlet. You can mount this camera wherever you can run an Ethernet cable. Please note that you will need a network that supports HDBaseT to take advantage of this feature.
You can control the camera via the included IR remote commander, the RS-232 port, or the HDBaseT port.
The camera features built-in web based interface for control via your browser.
Status Indicator LED
Purple – Boot-up and Standby modes.
Blue – Normal operation and is a power on, ready condition.
Blinking blue – The camera has received IR from the remote or other IR source.
Red – Tally function; shows that the camera is on-air.
Blinking red – Fault condition.
Yellow – Firmware update is in progress.
Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America)
The OneLINK Bridge A/V Interface Receiver from Vaddio connects a non-USB camera and audio source, and bridges to a USB stream for easy connection to USB-based conferencing applications such as Skype for Business, Google Hangouts, and Zoom. This OneLINK Bridge kit simplifies installation by extending power, video, and control to your Vaddio HDBaseT camera over a single Cat5e cable up to 328′.

Converts any conference room to a BYOD environment, delivering a USB stream for soft conferencing clients
Connects professional A/V equipment to PC applications via USB 3.0 media stream
Simultaneous uncompressed USB 3.0, HDMI 1.4b, and 3 Gb/s HD-SDI
Two balanced audio inputs and two balanced audio outputs
Control via web interface or Telnet
Status lights

In the Box
Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (Silver/Black)
Vaddio IR Remote Commander
AC Adapter (12 VDC, 3 A)
North American Power Cord Set
Thin Profile Wall Mount
EZCamera RS-232 Control Adapter
2-Year Warranty
Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America)
Power Supply
4 x 3-Position 3.5mm Phoenix Plug
USB Cable (6′)
RS-232 Adapter
2-Year Warranty